Vinyl Stair Edging

Vinyl Stair EdgingVinyl stair edging is more than the term states. It can also stand for vinyl stair nosing. No matter what term is used, they all serve one purpose. That is, to protect stair fronts from deterioration and extend their endurance. Therefore, this product must be treated and considered as such. Koffler Sales sells Johnsonite Vinyl stair nosing.

Installing Vinyl Stair Edging

Make certain all requirements are satisfied concerning exterior preparation prior to beginning the installation. Plug any empty spaces in the wood or concrete steps with a cementitious-based repairing mix. Measure, engrave, and clip and dry mount the stair edging to every step. Clean the back of the clipped edging with a sanitary dry cloth to get rid of any trash. Put on the one-inch VPI Adhesive Tape and VPI No. NC-2 Nose Caulk across both exteriors of the edging. Limit the tape more than one inch from the essential angle of the edge. Clip leftover tape. Rotate tape with a hand roller to guarantee correct adhesion to the tread. Take away release paper from both edges of the edging. Push the edging evenly and securely to the step edge. Push the step part of the nosing down from front to back. Rotate nosing with hand roller.

Product Offerings

All Stair Treads and Floor Mats, a company based in Troy, Michigan, created two types of vinyl stair nosings: Grit Surface Aluminum and Koroseal. The first, the Grit Surface can be fitted inside or outside. It can be mounted on steps made of concrete, wood, preserved wood, slate or marbe. This product refurbishes slick, unsafe deteriorated stairs and safeguards new stairs. This product comes in either a 2-1/2 or 3-15/16-inch deep nosing which consists of the identical material as All Stair Treads

Stair Edging Vinyl

Stair Edging VinylJohnsonite, Incorporated, a company based in Chagrin Falls, Ohio, specializes in selling building supplies. One of their products is vinyl stair edging, or stair nosing. This product is also sold at Koffler Sales. Johnsonite Vinyl Stair Nosings are created from a standardized makeup of polyvinyl chloride, or PVC, first-class preservatives, and dyes to satisfy the operation conditions of ASTM F-2169 Standard Specification For Resilient Stair Treads. Johnsonite Vinyl Stair Nosings appear with a two, or 5.08 centimeter, wide co-extruded strip of complementary color to abide by American with Disabilities Act (ADA), Visually-Impaired, and California Title 24 Accessibility conditions. Customary preparation surpasses ASTM E 648 Class 1 Flammability conditions. Johnsonite Vinyl Stair Nosings are conceived for just inside uses and not suggested for industrial kitchen atmospheres.

Products Offered

Visually Impaired

The Recessed is presented in two models: VIRCN-XX-A and VIRCN-XX-B. VIRCN-XX-A has a two inch, or 5.08 centimeter pivoted square nose arrangement. Its tread is 3-1/8 inch, or 7.94 centimeter, deep with a two inch, or 5.08 centimeter, wide co-extruded complementary color strip. This stair nosing is undercut for

Stair Edging Strips

Stair Edging StripsIt may surprise some people, but stair edging strips are commonly known as stair nosing strips. A few of them are made of emery, which is the typical material found in nail files. Others are made out of metal such as aluminum or other materials like polyvinyl chloride, or PVC, slate, plastic, and so. If a person looks for them on the Internet, he or she can find that they are mostly manufactured in China.

However, Koffler Sales has its Blanke Anti-Skid Step and HD Anti-Skid Step Strips. The Anti-Skid Step Strip is the perfect stair edgings for stairways subjected to extreme traffic and rainy climates. Its PVC insert is mounted into an aluminum base to create a strong climate resilient stair nose. The HD Anti-Skid Step Strip is exclusively contrived to supply security and skid resilience for tiled steps in industrial uses subjected to extreme foot traffic. The HD Anti-Skid Step Strip

Stair Edging for Laminate Flooring

Stair Edging for Laminate FlooringOn September 15, 1998, Thomas J. Nelson, an inventor from Belton, Texas, patented the first stair edging for laminate flooring. This particular invention was only to be used on steps. The stair detail has a lengthened, inflexible base component for stair nosing installation. This must be done on the top edge of a stair step and an extended, stiff tread component covering and linked with the inflexible base component. The base component possesses a nose segment with a curved face exterior for marking out a top edge on a stair step and planar back exteriors that cross at right angles. Flanges lengthen across from and on the similar plane as the rear exteriors of the nose segment for placing the base section on the tread and riser of a stair step.

According to this information, stair edging, or stair nosing, for laminate flooring is a somewhat recent creation. A person must wonder how people protected laminated flooring be this was invented. If this product is anything like the other types of stair edgings, then it should be more or less complicated. Koffler Sales does not seem to sell stair edging for laminate flooring.

Proper Stair Nosing Installation for Laminate Flooring

Before doing any work, first sweep any trash off the stairway and measure the width of the step with the measuring tape. When all of the prep work is finished, now you can begin. Reduce the wood stair nose detail to the measurement of the step with the wood saw. Then use the hack saw to reduce the metal track to the measurement of the step. Fit the metal track on the stair nose with the liquid nails glue. Mount the track only near enough to the edge of the stair nose to permit the edge of the stair case molding to loom. Set aside time for the glue to dry, by adhering to the instructions on the tube of glue. Put the glue onto the stair nose molding and include it into the metal track. Set aside time for the glue to dry, by adhering to the instructions on the tube of glue.

Product Offerings

The stair nosing for wood laminate shields the laminate or carpet edge on the stair. The stair nosing for laminate is mounted with screws to permit a firm hold to the stair edge. The existence of the carpet or laminate floor at the stair edge is prolonged the utilization of the stairs shielded, and a stylish look became visible acknowledging to the installation of the stair nosing for laminate.

The laminate flooring end trim conceals the uneven edge of the wood laminate floor. The laminate flooring trim hides the asymmetrical edge. In addition, it gives limitation and lengthens the duration of the laminate floor by shielding it from deterioration.

In short, stair edging for laminate flooring is somewhat similar to the stair nosing for carpet. The installation instructions seem identical. A few types of laminate stair edgings can be used on carpeted stairs. Maybe, laminate is the new carpet.