|Print / Email Page|
A636 Anti-Slip Abrasive Tape
A637 Anti-Slip Abrasive Tape
There are four important areas to always remember when applying A636 or A637 Anti-Slip Abrasive Tape:
1. Make sure the substrate surface is clean, dry and smooth.
2. Minimum application temperature (of the substrate) in order to successfully bond the pressure sensitive adhesive in A636 or A637 Anti-Slip Abrasive Tape:
o A636 Anti-Slip Abrasive Tape- 40°F (4°C)
o A637 Anti-Slip Abrasive Tape - 40°F (4°C)
3. After removing the liner from the pressure sensitive adhesive side of the tape or tread, minimize 'touching' the adhesive surface during application so that oils and soil from the hands do not contaminate the adhesive prior to bonding.
4. Finally, make sure all the surface of the Safety-Walk product is ' pressed or rolled firmly ' during applications to provide optimum contact and bonding.