Non-Skid Tape / Grip Tape
Anti Slip Tape
3M or KSC Super or Regular anti-slip abrasive tape with adhesive back. 24 sizes to choose from. Sold in strips, and rolls.
Skateboard Grip Tape
PimpGrip brings the fun back to skateboarding. Superior grip performance and quality construction. 13 mind-blowing colors. Strips and Rolls.
Resilient Anti-Slip Tape
Resilient abrasive tape created specifically for bare foot traffic. Ideal for wet areas such as pools and bathrooms. Available in strips or rolls.
Safety Anti-Slip Tape
Offering glow-in-the-dark, high visibility, "caution", and "watch your step" anti-slip abrasive tapes in a variety of sizes.
Conformable Anti-Slip Abrasive Tape
Non-slip material, can be rolled, bent or angled to fit any contour. Comes in strips or rolls. Use for irregular or non-smooth surfaces.
Aisle Marking Tape
ENJOY 5% OFF NOW! Quality aisle marking tape that will adhere to most any clean, dry surface.
Hazard Warning Tape
ENJOY 5% OFF NOW! Our most popular conformable PVC hazard warning tapes. Select from a wide array of OSHA colors.
Reflective Tape
5% OFF! Reflective tape products to suite most any application offer vibrant daytime visibility with reflective properties for nighttime.
Non Skid Tape and Anti Slip Abrasive Tape
Koffler Sales offers the largest online selection of non-skid tape for anti-slip safety, resiliance, comfort, and more. All of our products carry a 100% satisfaction guarantee. We pride ourselves on excellence in customer service as well as our high rate of customer satisfaction. Our team is always available to answer your questions or to provide specification information about our anti-skid tape or any other products. Our wall and floor systems are perfect for commercial or residential use. Koffler’s anti slip abrasive tape provides improved non slip traction and availability in many colors, shapes, and sizes.Product Installation for 3M non-skid tape: There are four important areas to always remember when applying Koffler's Anti-Slip Abrasive Tape (A636) or Koffler's Conformable Anti-Slip Abrasive Tape (A637): Make sure the substrate surface is clean, dry and smooth. Minimum application temperature (of the substrate) in order to successfully bond the pressure sensitive adhesive in A636 or A637 Abrasive Tape: 636 Anti-Slip Abrasive Tape- 40°F (4°C) A637 Abrasive Tape - 40°F (4°C) After removing the liner from the pressure sensitive adhesive side of the tape or tread, minimize 'touching' the adhesive surface during application so that oils and soil from the hands do not contaminate the adhesive prior to bonding. Finally, make sure all the surface of the Safety-Walk product is ' pressed or rolled firmly ' during applications to provide optimum contact and bonding. For complete tape installation instructions, please visit our non-skid abrasive tape information page at http://www.kofflersales.com/displaydocument.asp?did=2
Product Removal
Non-Skid Abrasive Tape products are not easily removed once bonded. The adhesives used in these products are durable and strong. Suggested removal procedure: Using a 'putty knife' or similar tool, insert under the edge of the tape or tread, and pry upwards to lift edge. Continue around all edges of the tape or tread. Use a 'pliers' or similar tool to grasp the open edge and pull (at a 180 degree angle) back over the tape or tread. Use a Citrus Base Industrial Cleaner chemical to soften any adhesive which may remain on the substrate. Clean residue off, rinse, dry and reapply new non-skid tape by 3M. For complete anti slip abrasive tape removal instructions, please visit our non-skid information page at http://www.kofflersales.com/displaydocument.asp?did=3
For installation instructions on KSC brand non-skid tape, please visit our non-skid information page at http://www.kofflersales.com/displaydocument.asp?did=3