Don't damage your plastic sheet by using a standard drill bit! These specially designed drill bits are safe for use on KSC polycarbonate and plexiglass acrylic sheets. Ideal for use with Plexiglas, Lucite, Acrylite, or Perspex acrylic sheets. Also ideal for Lexan, Tuffak or Makrolon polycarbonate sheets. These are specially ground flukes with a 90° point for drilling holes and special 60 degree angle.
Drill bits with special tip designed for drilling through plastics
90° point for drilling holes
When drilling holes for screws be sure to make the hole larger than the screw to allow for expansion and contraction of the material. If you do not drill the hole large enough it will cause stress cracks at the hole that will spread.
Always have a backer board behind the plastic sheet when drilling - most problems happen when you punch through the back side.
Not recommended for use with wood or metal
Do you have any questions about this product? Call (888)355-6287, or email us.
Product color is as described under 'Sizes and Prices'
Don't damage your plastic sheet by using a standard drill bit! These specially designed drill bits are safe for use on KSC polycarbonate and plexiglass acrylic sheets. Ideal for use with Plexigla, Lucite, Acrylite, or Perspex acrylic sheets.
Clear Acrylic Wall Protection Sheets
Clear Acrylic Plexiglass Sheets are lightweight, shiny-clear, and more scratch-proof than Polycarbonate. However not as strong. Available in
5 thicknesses, 55 sizes.
Clear Polycarbonate Wall Protection Sheets
Clear Polycarbonate Sheets are super-high impact strength, clear plastic sheets that are virtually unbreakable. Available in 5 thicknesses and 33
Corner Guards Clear or Colored
End corner damage! These polycarbonate smooth corner guards for walls are easy to install, low-cost, and offer excellent protection.
Plexiglass and Polycarbonate Cutting Tools
Need to cut that plastic sheet? KSC has great plastic sheet cutting tools including: edge scraper, saw blades, sabre saw blade and plastic cutters. We can help you get the job done!