|Print /Email Page|
Johnsonite Vinyl T-Molding - #A516
- Sizes and Prices
- Related Products(4)
Johnsonite Snap-In 'T' Molding and is made from high quality PVC, are extremely durable, and create the perfect, professional flooring finish for joining carpet to various flooring materials. Combined with your choice of track molding (purchased separately) can enhance any flooring transition.
- Complies with performance and design requirements of the Americans with Disabilities Act
- For interior use only
- 39 color options
- 1st choose from 5 track base options and 2nd choose from 7 vinyl moldings, they simply snap together
- Snap-In T Molding for Joining Carpet to:
- Track Base Molding options include:
- Single Flange
- Pin type
- MTC-00-A, MTC-00-B For Contour 6' min. Radius Curves
- 39 Color options
- 12 Foot Strips
- Complies with A.D.A. requirements of Section 4.5.2 Changes of Level.
- Manufactured from a homogeneous composition of polyvinyl chloride (PVC), high quality additives, and colorants.
- Standard formulation exceeds ASTM E 648 Class 1 Flammability requirements
- For interior use only
Want more information?
See the following Product Information Sheet(s):
We recommend Vinyl Adhesive
Do you have any questions about this product? Call (888)355-6287, or email us.Questions others have asked:
We just had thick carpet installed that abuts ceramic tile (straight edges). I'd like to add a transition molding that protects the carpet edge from fraying and getting dirty when cleaning the tile. I think I see how to measure the metal track, but not sure how to pull up edge of carpet and tuck it back in tightly. Any suggestions?
Hi Denise, Thank you for your question. You can attempt to pull the carpet up gently without damaging the carpet. Please refer to the installation instructions located on this product page under the tab, "Specifications". Also, please take a look at this product as well (A518) which doesn't need a track. http://www.kofflersales.com/p/wheeled-traffic-transitions.asp?cid=2584 Thank you, The Koffler Team
Is it possible to use this product for a transition with a radius less than 6'? And how have you determined what the minimum radius is (e.g. breakage at 6'?)? Also, let me know if/how I can send you a photo of the potential transition so that you can recommend the best color(s).
Hi Josiah, Thank you for your question. The radius requirement is recommended by Johnsonite and that's our guidelines. Unfortunately, we have never tested any smaller of a radius. Thank you, The Koffler Team
How wide is the riser on the metal and plastic track used to snap in the moulding? 0.5 in, 0.25 in, other? Thx Dave
Thank you for your question. If you scroll through the images in the right-hand image box, you can see the cross section for each one shown. The metal is 21/64" and the plastic is 11/32". If you need anything else, please let us know.
I have recently had a flooring company install luxury plank vinyl flooring in my kitchen. There is a height difference at the transition to carpet (my family room). They have installed a wood transition piece that we keep tripping over or stubbing our toes because one side has an L edge. This product seems as tho it would be a better option. Please advise. Thank you.
Hi Rebecca, Thank you for your question. Yes, this product is certainly an option and used for that application by many of our customers. There are also other options, please feel free to copy and past this link to our category page. http://www.kofflersales.com/floor-edging.asp Thank you, The Koffler Team
What type of adhesive should be used to secure a transition metal track to a concrete floor?
Hi Michael, Thank you for your question. You can use our product A408. Please copy and paste this link to view our recommended adhesive, http://www.kofflersales.com/p/stair-treads-and-corner-guard-adhesive.asp thank you, The Koffler Team
We have track base already installed but would like to replace the existing vinyl adapter. How do I measure the existing track base "rail" to be sure that I order the correct adapter? Thank you.
Hi Lynn, Thank you for your question. It would be important to measure the depth of the current track, and the thickness of the carpet or floor on each side. Then match the measurements up with one of the profiles. Thank you, The Koffler Team
I have an approx. 3/3 square entry way. Do you cut this product for the corners, or can it be bought with corners?
Hi Tom, Thank you for your question. The manufacturer doesn't make corners, so the best way is to Mitre them. Thank you, The Koffler Team
How do you suggest I cut the Vinyl T-molding to size? Can I use a miter saw? or should I use a utility knife. Thanks, Mark
Hi Mark, Thank you for your question. We would recommend cutting it with a utility knife. Thank you, The Koffler Team
Will you cut to order? I need 32 1/4 and 31 7/8...Track and T-molding.
Hi Calvin, Thank you for your question. Unfortunately, we do not custom cut this product. However, you can cut it yourself with an electric saw or handsaw that has a aluminum cutting blade. Thank you, The Koffler Team
I have an area in my house that is a transition from tile to tile that has a slight height discrepancy. I am not sure what to order. Do you have suggestions for what to do there? My phone number is 731-695-1980 or email is listed above so whatever is the easiest mode of contact for you. Thanks so much!
Hi Kelly, Thank you very much for the question. We will have someone call you soon. Thank you, The Koffler Team
Can the CD-XX-A be used outdoor, looking for a t trim strip to go between foam panels on a foundation. How wide id the part that goes down? thanks
Hi Gene, Thank you for your question. Unfortunately, this product is not recommended for outdoor use. Thank you, The Koffler Team
Hello, I'm wondering which T-molding product I should get specifically if I have rubber flooring on one side that is 3/8 thick and carpet on the other side that is 5/8 to 3/4 thick. Thanks, Rus
Hi Rus, Thank you for your question. It looks like profile CC-XX-C would be the profile that would fit your application best. Also, please look at Roppe's product and profile 182, Here is the link, http://www.kofflersales.com/p/roppe-vinyl-reducers.asp?cid=2623 Thank you, The Koffler Team
Can this product be used to join vinyl laminate with vinyl laminate? Also, can we get color samples to match the floor as close as possible?
Hi Melissa, Thank you for your question. Yes, you can join vinyl laminate with vinyl laminate. For sure, we can send you samples. Our sample department will contact you today to get your information. Thank you, The Koffler Team
Is the vinyl T-Moulding paintable?
Hi Frank, Thank you for your question. Unfortunately, the T-Moulding is not paintable. Thank you, The Koffler Team
Can this system be reversed, where the track is embedded in thinset beneath the tile, i.e.,tile is meeting carpet or tile is simply being terminated at a doorway?
Hi Lou, Thank you for your question. We do not recommend reversing the process. It could possible lead to tile cracking down the road. Thank you, The Koffler Team.
Is this rubber or flexible
Hi Dave, Than you for your question. This product is PVC Vinyl. It not too flexible. If your looking for a molding that is flexible, please view this product, specifically the Countor Edge (last 6 line items). http://www.kofflersales.com/p/slim-line-transitions.asp?cid=2605 You can shape this to make gradual turns. Thank you, the Koffler Team
Johnsonite Vinyl T-Molding
Johnsonite® Carpet Snap-In "T" Molding and Track Base Transition Molding are made from high quality PVC, are extremely durable, and create the perfect, professional flooring finish for joining carpet to various flooring materials.
- Koffler Sales, LLC
- © Copyright 2017. All rights reserved. 1-888-355-MATS
- Privacy Statement