- Available in Galvanized Steel, Stainless Steel, Brushed Aluminum, Colored Steel, and Colored Aluminum
- Comes in 11 standard sizes
- 2x2, 2x3, 4x3 come in packages of 2, all others sold individually
- 9 Steel color options
- 17 Aluminum color options
- Expanding Hollow Wall Anchors for use in wallboard, drywall, sheet rock, gypsum board, plaster, and paneling. Fits 1/8" to 1/2" thick wall.
- Screw for use into wall studs #14 x 2-1/2" Phillips Pan Head Zinc Plated
- Come with 1/2" Self-Stick Spacers. Additional mounting Self-Stick Spacers available to keep the interior of your pegboard panel rigid
- 2x2, 2x3, 2x4, 2x6, 2x8, 4x4 requires 1 self-stick spacer pack
- 2x10, 4x6 requires 2 self-stick spacer packs
- 4x8 requires 3 self-stick spacer packs
- 4x10 requires 4 self-stick spacer packs
|
- Heavy-duty metal construction will not rust, rot, corrode or degrade
- No framing required, 3/4" flanged sides for rigidity and peg hook clearance
- Accepts 1/8" and 1/4" standard peg hooks
- Self-stick spacers included
- Easy to clean; resistant to oil, grease, petroleum products and most household chemicals
- Galvanized steel pegboards: thick, strong, 22 gauge construction, silver/gray color, magnetic surface
- Stainless steel pegboards: thick, strong, 22 gauge construction, magnetic surface
- Brushed aluminum and aluminum color pegboards have 18 gauge metal construction, colored aluminum available in 17 different colors
- Steel Colors: 24 gauge metal construction, magnetic surface, 9 color options
- Load rating based on tile size and evenly distributed loads. If you need to increase your load capacity try using multiple tiles; for example, four units of 2x4 tiles (1/2 ton x 4 = 2 tons) vs. one 4x8 (1 ton capacity)
- Tile sizes 2x2, 2x3, 2x4, and 2x6 have 1/2 Ton Load Capacity
- Tile sizes 2x8, 2x10, 4x3, 4x4, and 4x6 have 3/4 Ton Load Capacity
- Tile sizes 4x8 and 4x10 have 1 Ton Load Capacity
- Board Size/#Pegholes: 2x2/441, 2x4/945, 2x6/1,449, 2x8/1,953, 2x10/2,457, 4x4/2,025, 4x6/3,105, 4x8/4,185, 4x10/5,265
- No assembly required - comes ready to install (hardware not included)
- Holes are 0.265 inches diameter
- Holes are spaced 1" on center
- Exact Dimensions and Hole Chart
Want more information?
See the following Product Information Sheet(s):
|
0
5.0 of 5
(
If I paint over your colored steel magnetic panel, would it lose it's magnetic properties? Is the stainless or galvanized more magnetized than the colored steel? Thanks.
Hi Barbara,
Thank you for question. All of the products are the same magnetic strength. We do not recommend painting the product, as it may reduce the magnetic strength, as well as the paint may start to scratch off. At the bottom of this product page we do offer colored steel pegboards, which may be a perfect solution for your situation.
Thank you,
The Koffler Team
