Metal Stair Nosing - #A608

Do you have any questions about this product? Call (888)355-6287, or email us.

Questions others have asked:

I am going to put stair nosing over vinyl. Which of your products is appropriate - vinyl, rubber or metal?

Hi Bruce, Thank you for your question. It really depends on the look you wan tot achieve. All of the material is suitable. Thank you, The Koffler Team

---

Do you have any stair nosing that is suitable for EXTERIOR use? I have an outdoor step that is in front of my front door that is made of wood and needs protection from wear/use.

Hi Bob, Thank you for your question. Yes, several options and here are the links to them. Please feel free to copy and paste to view. http://www.kofflersales.com/p/stair-treads-and-nosing-fiberglass.asp?cid=49 PLUS: All of the products on this page except A608 and A789. http://www.kofflersales.com/metal-stair-treads.asp Thank you, The Koffler Team

---

I have a carpeted stair (wool berber) and would like to use the A608 profile A on the nose of the stair. Are nails provided long enough to hold the nosing over the carpet??

Hi David, Thank you for your question. Yes, nails are provided for Profile A and should be long enough. Thank you, The Koffler Team

---

Can your metal stair nosing be used with laminate?

Hi Wendy, Thank you for your question. Yes, our metal stair nosing is ok to use with laminate. Thank you, The Koffler Team

---

What do you have for thresholds that transition from one carpet to another.having the edges butt together they end up fraying no matter how good a job or carpet.

Hi Doug, Thank you for your question. We have a large selection of carpet edging. Please copy and past this link, http://www.kofflersales.com/floor-edging.asp Thank you, The Koffler Team

---

For the #A608, Profile A, what is the spacing of the predrilled nail holes? i.e. distance from one to the next? Thanks

Hi Jana, Thank you for your question. They holes are approximately 6" apart from each other. Thank you, The Koffler Team

---

Creating a small stage with glued on carpet squares I need to protect the corners/ nosing. Will metal nosing work, if so any specific profile? Or do I need to look at another solution?

Hi Perry, Thank you for your call. This product would be great as a solution. As for the profile , that would be up to your personal preference. Thank you, The Koffler Team

---

My steps are 36" wide. is it possible to have the 6 foot lengths cut to 36"? I need to order 3 sets for 12 three foot pieces. Thanks

Hi Richard, Thank you for your question. Unfortunately, the factory will not cut the product to less then 6ft. lengths. However they can be cut by yourself or any handyman with a metal cutting saw blade. Thank you, The Koffler Team

---

Hello, How do you recommend attaching the satin gold stair treads to wooden stairs? can they be glued to wood? Thanks!

Hi Donna, Thank you for your questions. The all of the metal nosings on this page are attached with nails which are included. Thank you, The Koffler Team

---

Just finished a big flooring project in our home. Installer used shiny gold metal stair nosing. Your #A608 metal stair nosing shows a picture with a medium brown color, but the colors tab doesn't show anything close to brown. A medium brown like the picture would work well for us. Suggestions? Tom

Hi Tom, Thank you for your question. Our color tab is much more color accurate then the product images. Feel free to request a sample of one of our colors by e-mailing us at, samples@kofflersales.com. Thank you, The Koffler Team

---

Hi - I incorrectly cut one of the profile D silver stair nosing I ordered. So just wondering if I can only order (1) 6' length instead of the 2 that comes in the package??? Best Regards, Charles

Charles, Thank you for your question. Unfortunately, these are manufactured in 12' lengths and we cut them in half and have to sell them as a pair. Thank you, The Koffler Team

---

I'm looking for a stir nosing solution that can deal with outside corners - wondering if there are corner caps as an alternative to a miter type joint. Suggestions?

Hi Chris, Thank you for your question. Unfortunately, there are no stair nosing products that we are aware of that have outside corners. Miter cuts have been the standard solution. Thanks, Ron

---

I have tiled some steps going to the basement, looking at metal stair nosing (profile A) and wondering if this can be glued down to tile? If so what type of glue should I use?

Hi Mark, Thank you for your question. Unfortunately, it's not recommended to be glued down. We do include holes and screws for the nosing to be properly attached to the stairs. Thank you, The Koffler Team

---

I have stairs that are 39" wide. I need a nose trim of 1" x 1 5/8" x 39" in aluminum. Do you have a product to fit my needs?

Hi Frank, Thank you for your question. Yes, our profile B is 1" x 1-5/8". However, the width comes in 2 pieces, cut to 6' lengths. This will give you additional material to accommodate other stairs in the future. Thank you, The Koffler Team

---

I am interested in the Metal Stair Nosing - #A608 in Profile C. It appears as though the available options are quantities of 2 for the 6ft rough cut sections for 64.65 each. I wanted to understand if that meant the cost would 129.30 for the two pieces. I really only need one piece of the 6ft sections. Thanks! Steven

Hi Steven, Thank you for your question. The price of $64.65 is for 2 pieces, 6' long. Typically this product only comes 12' feet long, except Koffler is the only company that pre-cuts this product in half to reduce shipping cost. Thank you, The Koffler Team

---

Could I get a color/chip sample of your "browns / tans" of your various metal stair tread/nose products; interested in A608 & A781 ... thank you.

Hi Glen, Thank you for your question. Yes, we will have our sample department contact you in the morning. Thank you, The Koffler Team

---

Is it possible to receive samples of the different metal nosings?

Hi Meange, Thank you for your question. Yes, we would be more then happy to send you samples. Please feel free to call us at 888.355.6287, or send us an e-mail at, samples@kofflersales.com. Please include your address and the samples you are interested in. Thank you, The Koffler Team

---

Metal Stair Nosing - #A608 Hi, Looking for a bronze finished nosing for micro-cement finished stairs. Not sure on exact profile and size, but can you ship these to the UK and how long would it take? Do you carry them in stock? Thanks

Hi Richard, Thank you for your question. Yes, we can ship these to the UK. Our checkout process will give you a country option to choose from as well as a few delivery options / shipping times. Thank you, The Koffler Team

---

Metal Stair Nosing #A608. I am wanting to us this on my tile steps but I don't need the screw holes. Can I get them without??

Hi Susan, Thank you for your question. Unfortunately, this product is only available with pre-drilled holes. Thank you, The Koffler Team

---

I'd like to install a stair nosing over pressure treated exterior treads. Is there a recommended product / method for this situation - i.e. exterior application and avoiding contact of disimilar metals (aluminum / ACQ)? Thanks

Hi Matthew, Thank you for your question. You can install this product outside on pressure treated wood, as it comes with tap in nails. However, if there's extreme weather or a lot of foot traffic, I would recomend one of our other outdoor metal treads on this page http://www.kofflersales.com/metal-nosing.asp They are more durable and will last longer. Thank You, The Koffler Team

---

Hello, I would like to inquire about the product: Metal Stair nosing #A608. Is this product sold in Canada? and if so, do you have information on distributors?

Hi Dalis, Thank you for your question. We don not have any retail stores in Canada. Please fee free to order on line and we will ship it anywhere in Canada. Thank You, The Koffler Team

---

Hi: I would like to buy metal stair nosing, I did look at product from profile A to E, I would like to know this metal stair nosing install go over the tile or flush with the tile on my stair. Thank you

Hi Hong, Thank you for your question.The stair nosing installs over the tile. Thank you, The Koffler Team

---

Can I get a608 in dark bronze?

Hi Mike, Thank you for your question. No, I'm sorry it is not available in Dark Bronze. Please feel free to request samples of other colors if you'd like. samples@kofflersales.com. Thank you, The Koffler Team

---

I have a curved stair and would like to know if I can specify your metal nosing product. the radius is abut 11'-0" . please let me know. Thanks

Hi Kota, Our metal stair nosing will not bend at a radius. However, please refer to our indoor Vinyl or Rubber stair nosing on this page. http://www.kofflersales.com/stair-nosing.asp Thank you, The Koffler Team

---

Metal Stair Nosing KofflerTreads http://www.kofflersales.com/p/metal-stair-nosing.asp New

• 

• KSC offers a complete selection of metal stair no sings in a variety of metal colors to choose from. Perfect to help promote stair well safety.

Sort By: Newest First Oldest FirstHighest RatedLowest Rated
27 Reviews		Page :    1 of 3    123

Nice product

Written by: - Anonymous 3/2/2018

5 / 5 stars

I was pleased with the product and it came in
a timely manner.

Repurposed

Written by: - Y.D. Yawanano 12/2/2017

4 / 5 stars

Finding appropriate 90 degree edging for unusual applications can be a bear. To edge a countertop in a bomb-proof manner I ended up repurposing stair step capping by installing it backwards with the grooved surface facing out vertically. I made it work with your product.

Perfect for my need

Written by: - Anonymous 11/3/2017

5 / 5 stars

Used for trim on front porch redo. Needed the extra hangover to to cover my imperfection. Cut distances myself and smoothed with dremel. Lined up perfectly. Put a beautiful finishing touch on my project!

Ugly screw holes in the otherwise beautiful trim

Written by: - Dmitrii 9/21/2017

3 / 5 stars

I got my nosing trim with pre-drilled screw holes. Those look terrible! Arranged in a weird pattern, the holes are the first thing that catches your eye when you look on my floor now. I just can't tell how horrible it is. This aspect screwed up my entire design. I have to re-order and reinstall the nosing now. They need to specify drilled/non-drilled more clearly on the website and add more pictures of how the drilled nosing looks (who would even order that?).

Nothing special

Written by: - Andy 9/19/2017

3 / 5 stars

Not impressed with the customer service. Lack of follow up when asking for shipping details. Had to call 3 times and finally got a reference for shipping. Product took 3 weeks to ship and it was a stocked item! I knew the metal ends would have bad cuts because I read a review saying his/her experience. It looks like the cut it by hand using tin snips. Room for a lot of improvement in my opinion.
----------------------------------------------------

Hi Andy,

We are very sorry you experienced unsatisfactory service. It is our daily goal to strive for outstanding customer service and unfortunately this time we let you down. Please feel free to give us call and we will try to rectify your inconvenience.

Sincerely,

The Koffler Team

Stair Nose molding

Written by: - Frank 9/18/2017

5 / 5 stars

just as promised. Great product and was exactly what I needed !!!

Wide star nosing

Written by: - Anonymous 2/5/2017

3 / 5 stars

When I received the product the package was partially ripped open which could explain why there were no nails to attache the nosing. The general quality of the nosing was good but I had ordered 6' pieces to fit on 3' stairs but the "rough cut" created more waste and short pieces that did not cover the full width of the step. They were 12' pieces cut near the middle with a shears making angled cuts and lengths that varied by over 1/4". Perhaps cutting them with a saw would make them equal lengths with straight ends.
----------------------------------------
We apologize for the inconvenience, all attempts are made to cut pieces in the 6' length area. If you would like to return the pieces or need additional nails please don't hesitate to give us a call.

The Koffler Team

Great Product!!

Written by: - Dave M 12/13/2016

4 / 5 stars

My wife and I were amazed at how well the product looked and performed. the metal was much more robust then the typical boxed DIY centers. The reason why I gave this product 4 stars was not due to the craftsman ship of the product, it was all in due to the lack of nails provided. I read all the reviews on this site and when I placed my order I asked to make sure that I had a proper amount of nails and I was re-assured that it was not going to be an issue. Well, I only had enough nails to do half the job. The two little packs of nails were not enough also some nails were loose in the main package and may have slipped out since the main package was not sealed at the ends fully. I did call back yesterday and request more nails and hopefully they will be here today. You would think that the business would read the reviews and make darn sure that enough nails are sent after some complaints especially at the price level being paid for the material, nails would only be pennies of cost per order however I need the color of the nail to match the nosing, it would be difficult to match at hardware store. Oh well, lets see if I get delivery today.

Perfect!

Written by: - Tom 7/5/2016

5 / 5 stars

We have a 5' wide step down into our Great Room from the
dining area that required a minimum of 1-1/2" to cover the
connection between the Great Room Trim and the dining area
flooring - getting that little extra width was becoming a
problem until found your product online - at first we
thought the pricing was a little high but discovered that it was well worth the cost as the quality and delivery are
exceptionally good. Thank you Tom and Sue

Stair Nosing Metal

Written by: - Artsyone 12/14/2015

5 / 5 stars

Went from one box store to another and called all carpet dealers and could not find this 1 5/8" stair moulding anywhere, a quick look on the internet and found this, in the right color and they were willing to cut it into 4 foot lengths, received it a couple of days later. Exactly as expected. Thanks for the great service, appreciate. Artsyone

27 Reviews

Page :    1 of 3